硅橡胶防水涂料 一、产品介绍: HC-10硅橡胶防水涂料是以硅橡胶乳液的复合物为主要基料,掺入无机填料及各种助剂配制而成的单组份乳液型、高分子的理想高档环保防水涂料。 二、产品优点: 1、施工方便:产品为单组份,施工无须加其他材料,可涂刷、喷涂或滚涂。 2、可渗入基底,与基底牢固粘,具有良好的防水、防渗透性。 3、成膜速度快可在潮湿基层上施工。 4、本产品无毒、无味、不燃,可用于各种食用水池或饮水工程的防水,且可根据需要配成各种彩色涂层。 三、适用范围: 1、地下建筑工程各部位的防水,如内外墙,护土墙等; 2、冷藏库优良的隔气,粘结保温等环保材料; 3、输水及贮水建筑物,如食用水池、水塔等自来水厂的防水工程; 4、各种建筑物的屋面、窗台、卫生间、地面、内外墙; Silicone rubber waterproof coating Product introduction: HC - 10 silicone waterproof coating is a silicone emulsion compound as the main makings, made from mixed with inorganic fillers and various additives of one-component emulsion, polymer ideal high-grade environmental protection is waterproof coating. Second, the product advantages: 1, construction is convenient: the product is a one-component, construction does not need to add other materials, brushing, spraying or roller coating. 2, can penetrate into the basal, and firm base, has a good waterproof, anti permeability. 3, fast film forming can be in damp base construction. 4, this product is non-toxic, tasteless, non-combustible, can be used for all kinds of edible pool or water engineering of waterproof, and can according to need to go into various colour coating. Third, scope of application: 1. ? 5、施工缝、裂缝、穿墙管、落水口等。 使用前先将本涂料搅拌均匀(不需再加水),然后用滚筒或油扫等工具将涂料涂刷于施工基面上,固化后则形成整体的防水胶膜。 四、材料用量:厚度1mm为1.2~1.5kg/㎡,1.5mm为2~2.2kg/㎡,2mm为3kg/㎡ 七、注意事项: 1、水泥砂浆保护层应避免混入小石子及尖锐颗粒,以免施工时损伤防水涂层。 2、本产品宜在5℃以上的温度施工,涂料使用时先将其搅拌均匀,不得任意加水。 3、本产品密封储存于干燥阴凉处,保质期为一年。 八产品包装: 产品包装为20 kg/桶、50kg/桶。